Detailing Clay pad has been used for years by automobile manufacturers and body / panel shops for removing
contamination that cannot be removed using conventional cleaning methods. Claying your paintwork is usually
recommended prior to polishing or waxing.
Features & Adavantages & Usage
1.Strong decontamination
It can safely and easily remove stubborn grease, insects stains, rust stains, stainless steel stains and plating stains, double-sided adhesive stains, rain stains and so on over spray from automotive paint and glass surface. Greatly improve the speed of construction(Better than the common clay bar)
2. Re-useable
It can be used over 150 times, this clay tray is not water-soluble , so after using, just squeeze it, the contamination on the magic clay will come off naturally in water, then you can use it again.
3.Environmentally friendly
Don't need to use any other detergents, only need to use the most common of our daily- water.
Usage:
1. While using, firstly wet the pad, use the rubber side(grey color) to wipe the contamination softly until the surface is clean and smooth.
2. It can be used on car painting, glass, chromeplate surface.
3. If applied by machine, just directly stick the velcro side onto the machine, like wax-polishing machine, abrasive finishing machine.
Notes:
1. Please don't use it directly on dry painting surface.
2. Cannot be used directly on high temperature surface. Otherwise, it may be dissovled on the surface.
3. Don't press it too hard while using. Just wipe the contamination lightly.